Radio Station Equipment: An Introduction

Must-have equipment for a radio station setup

Some radio stations operate from their own buildings equipped with broadcasting equipment. Others broadcast from skyscrapers, strip malls, or other locations because of financial reasons or geographic considerations. When companies own several radio stations in one city or area, they usually consolidate them into one building. A terrestrial radio station requires must-have equipment to play over the airwaves.

Internet radio stations do not require the overhead of a terrestrial radio station and can be run minimally in a room—or the corner of a room, as in the case of a hobbyist.

Radio Station Microwave Receivers and Relays

Many radio stations do not house their transmitter and broadcast tower on the same property as the studios.

Telecommunications towers, blue sky with clouds
maumapho / Getty Images

The radio signal is sent by microwave to a similar microwave receptor on the grounds where the transmitter and tower reside. The microwave communication is then converted into a signal that is broadcast to the general public. It is not uncommon for a radio station's studios to be located 10, 15, or 30 miles away from the transmitter and tower.

A single tower broadcasts for one or more radio stations simultaneously.

Satellite Dishes at Radio Stations

Many radio stations—especially those that air syndicated radio shows—receive these programs from a satellite feed.

Satellite dishes on top of a radio station

deepblue4you / Getty Images

The signal is fed into the radio station's control room, where it travels through a console, also known as a board, and is then sent to the transmitter.

Digital Radio Station Studios

A typical broadcast studio at a radio station consists of a console, microphones, computers, and—occasionally—some older analog-based equipment.

Modern radio station broadcasting studio
kjekol / Getty Images

Although most radio stations have switched to digital operations in the U.S., if you look hard enough, you will find some old reel-to-reel tape recorders/players sitting around.

It's unlikely any stations use turntables or vinyl records anymore, although there has been an audiophile-driven resurgence in vinyl LPs for consumers.

Radio Station Studio Audio Consoles

All the sound sources are mixed at the audio console before being sent to the transmitter. Each slider, sometimes known as a pot on older boards, controls the volume of one sound source: microphone, CD player, digital recorder, or network feed.

Professional sound mixer
sinopics / Getty Images

Each slider channel includes an on/off switch and various other switches that divert to more than one destination. A VU meter shows the operator the level of sound output.

The audio console converts analog audio (voice inputs from a microphone) and phone calls to a digital output. It also allows for mixing digital audio from CDs, computers, and other sources with analog audio.

In internet radio, the audio output transfers to a server that distributes the audio—or streams it—to listeners.

Radio Station Microphones

Most radio stations have an assortment of microphones. Some microphones are designed for voice and on-air work. Often, these microphones sport a windscreen.

Microphone in radio studio
avdyachenko / Getty Images

The windscreen keeps extraneous noise to a minimum, such as the sound of breath blowing into the microphone or the sound of a popping "P." Popping Ps occur when a person pronounces a word with a hard "P" in it and in the process, expels a pocket of air that hits the microphone, creating undesired noise.

Radio Station Software

Most radio stations employ sophisticated software to either automatically run the station when a human can't be there or to assist a live DJ or personality in running the station.

DJB Radio software

Various types of software support station operations. The display outputs directly in front of the audio console, where it can be seen by the person on-air.

Radio Studio Headphones

Radio personalities wear headphones to avoid feedback. When a microphone is turned on in a radio studio, the monitors (speakers) automatically mute.

Headphone top view
cherrybeans / Getty Images

When the monitors are muted because somebody turns on the microphone, the only way to monitor the broadcast is by using headphones to hear what's going on.

Radio Station Studio Soundproofing

It's essential to soundproof a radio studio to keep the radio personality's voice sounding as good as possible.

Soundproof wall
demachi / Getty Images

Soundproofing takes the "hollow sound" out of a room. Do you know what it sounds like in your shower when you speak or sing? That effect is the sound waves bouncing off of smooth surfaces, like porcelain or tile.

Soundproofing is designed to absorb the bounce of the voice's sound wave when it hits the walls. Soundproofing flattens the sound wave. It does this by creating a special texture on the radio studio walls. Cloth and other fixtures on the wall are employed to flatten the sound.

Was this page helpful?